YYQ 700 Kw Thermal Oil Boiler For Wood Processing Timber Mill
Thermal oil boiler introduction
YY (Q) W series thermal oil boiler is a kind of thermal oil boiler which use gas or oil as fuel.
Thermal oil boiler is a new type of special boiler with low pressure and high temperature working characteristics. Thermal oil boiler uses hot oil as heat transfer medium, hot oil circulation pump to make the medium has a forced circulation, then deliver the heat to heating need equipment and then go back to the heating furnace.
Advanategs Thermal Oil Boiler Design
1. Three pass coil pipes design.
2. Wet back structure.
3. Energy saving device design.
4. Outputting oil tank extemal design.
5. Dislocation double sealing slot design,seals very tight and avoid leakage.
6. Original imported burner.
Thermal Oil Boiler Technical parameters table
| Design parameter | Unit | Date |
| Rated power supply | Kw | 3000 |
| Working medium | | L-QD340 thermal conductive oil |
| Circulating oil | m3/h | 160.7 |
| Maximum working pressure | MPa | 0.8 |
| Heating surface | radiation | m2 | 21.5 |
| convection | m2 | 124 |
| Economizer heating surface | m2 | 63.9 |
| Thermal oil flow rate | m/s | 3.12 |
| Furnace media capacity | m3 | 2.24 |
| Thermal efficiency | η | 92.08%(gas)92.57(oil) |
| Auxiliary power | KW | 65.5 |
| exhaust temperature | ℃ | 142.26(138.3) |
| Rated oil temperature | ℃ | 290 |
| Fuel consumption | Kg/h | 385.16Nm3/h(gas)313.41Kg/h(oil) |
| Maximum transport size | mm | 5600×2400×3170 |
The listed technical parameters are for reference only and can be designed according to different requirements of users.
Thermal Oil Boiler Application use industry
1. In the road construction project, it is mainly used for heating and insulation of asphalt heating, dissolving, asphalt storage tank, asphalt concrete and emulsified asphalt.
2. In the building materials industry, the heat transfer oil furnace is mainly used for gypsum board drying, concrete member solidification protection and prefabrication production, tile stamping, decorative material drying and linoleum production line heat.
3. In the wood industry, it is mainly used for the hot pressing of fiberboard, particleboard, laminate, plywood, veneer and wood drying equipment, drying equipment, coating equipment and glue machine heating.
4. In the fat industry, the heat transfer oil furnace is mainly used for heating of oil, such as oil decomposition, fatty acid distillation, lipidation, nitrification, hydrogenation reflection, concentration, vacuum deodorization and the like.
5. In the paper industry, it is mainly used for heating of glue roller, drying roller, drying room, drying cabinet, hot melt machine, melting wax pot and corrugated paper processing.
6. In the fat and paint industry, it is mainly used for heating in autoclaves, dryers, distillation irrigation, evaporation equipment, paint drying, baking, drying and high temperature curing.
7. In the medical industry, it is mainly used for the preparation of drugs, raw material mixing, disposition, disinfection, distillation, evaporation, melting and other equipment and equipment heating.
Product Tags:
|
|
High Temp Oil Output Thermal Oil Boiler For Wood Processing Timber Mill Images
|
